This kit contains all parts needed and tools to finish 2 Pro Carry 80%1911.
This is a not an FFL item. This is not a complete frame and still requires additional machining to be done. This kit is a bit tighter then our other kits and will require fitting.
4 Operations left to be completed are
- Decking top
- Hammer hole
- Sear pin holes
- Slide rails
- Beavertail safety fitting (personal preference)
Kit does not come with sights or a magazine.
Parts list includes all Small parts are machine grade (No Cast or MIM)
- 80% 1911 Frame in series 70.
- Frame is 416r ss with checkered grip.
- Slide is 4140 cs series 70 slide is cut for Novak sight.
- Firing pin hole is .065
- Forged 416r match grade barrel.
- One piece guide rod ss.
- Match barrel bushing ss
- Plunger tube ss
- Internal extractor ss
- Skeletonized 3 hole trigger alu
- Beavertail safety ss
- Mainspring housing ss
- All fire control parts ss
- Spring kit
- Pin kit ss
The PRC finishing kit has all the necessary tools used for frame and slide fitment. All of our tools are designed for a lifetime of work. The PRC and the decking fixture are both designed to be rebuilt and reused for many builds. Using the tools correctly you can easily finish 6-8 frames before replacing the cutting blades or resharpening. The PRC is used for cutting the rail grooves and frame thinning. The Decking fixture is for lowering the frame height and drill locations for sear and hammer. It is compatible with most other single stack frames on the market but not a guarantee. When using 1911 Builders frames, the deck height must be done before using the PRC.
- Decking Fixture
- Drill bits #22 #35
- Lapping Compound